Sciences in Cold and Arid Regions ›› 2015, Vol. 7 ›› Issue (4): 300-306.doi: 10.3724/SP.J.1226.2015.00300
• ARTICLES • Previous Articles
HaoLin Yu1, XinLei Na2, ZhaoHui Joey Yang2
ASTM D3080-2011, 2011.Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions. ASTM D5918-2013, 2013.Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils. Jo BW, Kim CH, Tae GH, et al., 2007. Characteristics of cement mortar with nano-SiO2 particles. Construction and Building Material, 27(6):1351-1355.DOI:10.1016/j.conbuildmat.2005.12.020. KumarA, WaliaBS, MohanJ, 2006.Compressive strength of fiber reinforced highly compressible clay. Construction and Building Material, 20(11): 1063-1068. DOI:10.1016/j.conbuildmat.2005.02.027. Ren XC, Hu K, 2014.Effect of nanosilica on the physical and mechanical properties of silty clay.Nanoscience and Nanotechnology Letters, 6:1010-1013. DOI: 10.1166/nnl.2014.1857. Tang CS, Shi B, GaoW, et al., 2007.Strength and mechanical behavior of short polypropylene fiber reinforced and cement stabilized clayed soil. Geotextile and Geomembranes, 25(10):194-202.DOI:10.1016/j.geotexmem.2006.11.002. Tart RG Jr,1983. Cold Regions Earthwork. Cold Regions Construction: A State of the Practice Report Papers Presented during a Session at the ASCE Annual Convention,pp. 32-37. |
[1] | Yan Lu, Xin Yi, WenBing Yu, WeiBo Liu. Numerical analysis on the thermal regimes of thermosyphon embankment in snowy permafrost area [J]. Sciences in Cold and Arid Regions, 2017, 9(6): 580-586. |
[2] | LiHui Luo, Wei Ma, YanLi Zhuang, ZhongQiong Zhang. Deformation monitoring and analysis at two frost mounds during freeze–thaw cycles along the Qinghai–Tibet Engineering Corridor [J]. Sciences in Cold and Arid Regions, 2017, 9(4): 378-383. |
[3] | QingZhi Wang, JianKun Liu, JianHong Fang, AnHua Xu. Direct shear tests of coarse-grained fillings from high-speed railway subgrade in cold regions [J]. Sciences in Cold and Arid Regions, 2017, 9(3): 236-242. |
|